** Free Shipping **
The YT-1200 integrates seamlessly with your Yaesu transceiver, providing semiautomatic antenna tuning across the entire HF spectrum, at power levels up to 125 watts SSB or CW, 100 watts on 6 meters or 30 watts on a digital mode.. It exchanges data with your transceiver, allowing you to control all tuning operations with the tuner’s Tune button. The YT-1200 will tune dipoles, verticals, Yagis, or virtually any coax-fed antenna. It will match an amazing range of antennas and impedances, far greater than some other tuners you may have considered, including the built-in tuners on many radios. The YT-1200 is similar to previous LDG tuners, but is specially engineered to integrate with these Yaesu HF radios:
• FT-450 and 450D
• FT-991 and 991A
The YT-1200 connects to the Cat port on the back of the radio. There is a pass through data port to connect to your PC for computer control of the transceiver. Tuning is greatly simplified; use the Tune button on the tuner to start an automatic tuning cycle.
RF Power: 1 to 125 Watts SSB/CW, 30W Digital
Latching relays for ultra low power consumption
Compatible with FT-450, FT-450D, FT-950, FT-991*, FT-991A, FTDX-1200, and FTDX-3000 radios. *May not work with all firmware versions.
RS-232 CAT thru port for computer control of radio. Any baud rate.
2000 memories sorted by frequency.
1.8 to 54 MHz coverage
Tunes 4 to 1000 ohms. (16 to 150 on 6M)
SO-239 in and out connections for dipoles, verticals, beams, G5RV, OCF, ect.
Dimensions: 7.0″ L, 7.8″ W, 2.0″ H.
Weight: 2 pounds