** Free Shipping. **
MFJ 267 Dummy Loads is one of the world's most versatile station accessory. This 1.5 kW dummy loads feature a built-in, true peak-reading SWR/wattmeter that you can switch and use independently.
You'll find tons of uses for them. Tune up your transceiver, linear amplifier, or antenna tuner to a safe 50 ohm dummy load at full power. Then instantly switch to your antenna and monitor SWR (1:1 to 8:1), forward, and reflected power simultaneously through the extra-large 3 in. illuminated cross-needle meter.
Use them for testing/tuning transmitters, transceivers, amplifiers, antenna tuners, baluns, transformers, filters, matching networks, coax, stubs, transmission lines, and antennas. This 50 ohm dry dummy loads work DC to 60 MHz. SWR is below 1.3:1 at 30 MHz. They can handle 100 watts for 10 minutes or 1,500 watts for 10 seconds and come with a power derating curve. They read true-peak PEP or average power on 300/3,000 watts forward and 60/600 watts on reflected power ranges of 1.8-54 MHz.
The MFJ 267 dummy loads' high accuracy comes from a carefully designed directional coupler, an accurate active-peak reading circuit, and precision d'Arsonval meter movement. RF tight perforated aluminum cabinet.
Note: The built-in cooling fan requires a 2.1 mm power cord, not included.
* Dummy Load Intermittent Power Rating:1,500 watts
* Dummy Load Connector Type:UHF female, SO-239
* Dummy Load Type:Air cooled
* Dummy Load Frequency Range:0-60 MHz
Front Panel Display Meter:Yes
Dummy Load Width:4.000 in.
Dummy Load Height:3.000 in.
Dummy Load Depth:10.000 in.