716-434-9216
View Cart | Item(s)
25' LMR-240 solid coax cable assembly with PL-259 UHF Males on both ends.
Lower Loss than RG-8X
PL-259 Connectors/ Solder, Crimped and Heat Shrink
Note: LMR® is a registered trademark of Times Microwave
Specifications:
- PL-259 connectors on both ends of coaxial cable / Soldered/Crimped and Heat Shrink
- 50 OHM, Lower Loss than RG-8X
General
Specifications
- Cable Type LMR-240
- Braid Coverage 90% braid
- Packaging Type Reel Construction
- Materials : Braid Material Tinned copper Shield Tape
- Material Aluminum Dielectric
- Material Foam PE Inner Conductor Material- Copper
- Dimensions Diameter Over Dielectric- 3.810 mm (0.150 in)
- Diameter Over Jacket- 6.100 mm (0.240 in)
- Inner Conductor OD- 1.4200 mm (0.0559 in)
- Outer Conductor OD- 4.520 mm (0.178 in)
- Nominal Size- 0.240 in
- Electrical
- Specifications
- Cable Impedance- 50 ohm
- Capacitance- 79.8 pF/m (24.4 pF/ft) dc
- Resistance, Inner Conductor- 3.300 ohms/km (10.830 ohms/kft)
- dc Resistance, Outer Conductor- 3.890 ohms/km (12.760 ohms/kft)
- dc Test Voltage- 1500 V
- Jacket Spark Test Voltage (rms)- 5000 V
- Maximum Frequency- 31.00 GHz
- Operating Frequency Band- 30-6000 MHz Peak Power- 5.6 kW
- Shielding Effectiveness- >90 dB Velocity- 83%
- Environmental
- Specifications
- Installation Temperature- -40 °C to +85 °C ( -40 °F to +185 °F)
- Operating Temperature- -40 °C to +85 °C (-40 °F to +185 °F)
- Storage Temperature- -70 °C to +85 °C (-94 °F to +185 °F)
- Mechanical
- Specifications
- Bending Moment- 0.3 N-m (0.3 ft lb)
- Flat Plate Crush Strength- 0.4 kg/mm (20.0 lb/in)
- Minimum Bend Radius, Single Bend- 19.10 mm (0.75 in)
- Tensile Strength- 36 kg (80 lb)
- Performance Frequency (MHz) Attenuation, dB/100 m (dB/100 ft) 30 7.20 (2.20) 50 8.90 (2.70) 150 14.10 (4.30) 220 17.10 (5.20) 450 25.30 (7.70) 900 37.10 (11.30) 1500 49.50 (15.10) 1800 55.10 (16.80) 2000 58.70 (17.90) 2500 66.90 (20.40) 3000 74.80 (22.80)
