null
  • > serving ham radio since 1982
  • > Largest Ham radio Store in NY
  • > Big enough to serve you, small enough to know you.

Categories

M2 - 6M HO LOOP - 6 Meter (50-50.3 MHz) Loop, Horizontal, Omnidi

Shipping:
undefined (Fixed Shipping Cost)
$229.95
(No reviews yet) Write a Review
SKU:
6M HO LOOP
Condition:
New
Width:
17.00 (in)
Height:
33.00 (in)
Depth:
2.00 (in)
Shipping:
Calculated at Checkout

This antenna provides an omnidirectional, Horizontally polarized signal that is ideal for mobile and base operations on side band and CW.

Physically, the HO LOOP Antennas are square, fabricated from two 3/8 in. diameter aluminum tubes to minimize losses. Their sealed feed block provides weather protection with minimum wind drag. The heart of this unique design is the shorted stub matching to a 50 ohm coaxial feedline. They are lightweight and have very low wind area, which makes them ideal for stacking in base or mobile operations. Mounting is via a single 3/8 in. hole that is standard for most mobile hardware, with optional mounting hardware available for base or mobile installations, as shown.

Specifications:

Frequency Range: 50 to 50.3 MHz (6 Meters)
Gain, Typical @ 11 ft: 6.3 dBd @ 25 degrees
Gain, 2 Stacked @ 40 & 52 ft 10.3 dBd @ 6 degrees
Polarity: Horizontal Omni
Impedance: 50 ohms, unbalanced
Power Handling: 800 Watts, 1.5 kW for Stacked
Feed Contector: SO-239
Mounting: 3/8 - 24 or 1-1/4 - 2"
Vehicle Mounting Height: 30 Inch or more
Stacking Separation: 9 ft to 12 ft
Maximum Element Length: 29-1/2"
Wind Area: 0.1 square foot
Antenna Weight: 2 lbs

SUBSCRIBE TO OUR NEWSLETTER