716-434-9216
View Cart | Item(s)
50' LMR-240 Coax Cable with PL-259 UHF Males on both ends.
equivalent of LMR-240
Lower Loss than RG-8X
PL-259 Connectors/ Solder, Crimped and Heat Shrink
Made in the USA
Note: LMR® is a registered trademark of Times Microwave
Specifications:
• PL-259 connectors on both ends of coaxial cable / Soldered/Crimped and Heat Shrink
• 50 OHM
• Lower Loss than RG-8X
General Specifications
Cable Type LMR-240
Braid Coverage 90% braid
Packaging Type Reel
Construction Materials
Braid Material Tinned copper
Shield Tape Material Aluminum
Dielectric Material Foam PE
Inner Conductor Material- Copper
Dimensions
Diameter Over Dielectric- 3.810 mm (0.150 in)
Diameter Over Jacket- 6.100 mm (0.240 in)
Inner Conductor OD- 1.4200 mm (0.0559 in)
Outer Conductor OD- 4.520 mm (0.178 in)
Nominal Size- 0.240 in
Electrical Specifications
Cable Impedance- 50 ohm
Capacitance- 79.8 pF/m (24.4 pF/ft)
dc Resistance, Inner Conductor- 3.300 ohms/km (10.830 ohms/kft)
dc Resistance, Outer Conductor- 3.890 ohms/km (12.760 ohms/kft)
dc Test Voltage- 1500 V
Jacket Spark Test Voltage (rms)- 5000 V
Maximum Frequency- 31.00 GHz
Operating Frequency Band- 30–6000 MHz
Peak Power- 5.6 kW
Shielding Effectiveness- >90 dB
Velocity- 83%
Environmental Specifications
Installation Temperature- -40 °C to +85 °C ( -40 °F to +185 °F)
Operating Temperature- -40 °C to +85 °C (-40 °F to +185 °F)
Storage Temperature- -70 °C to +85 °C (-94 °F to +185 °F)
Mechanical Specifications
Bending Moment- 0.3 N-m (0.3 ft lb)
Flat Plate Crush Strength- 0.4 kg/mm (20.0 lb/in)
Minimum Bend Radius, Single Bend- 19.10 mm (0.75 in)
Tensile Strength- 36 kg (80 lb)
Performance
Frequency (MHz) Attenuation, dB/100 m (dB/100 ft)
30 7.20 (2.20)
50 8.90 (2.70)
150 14.10 (4.30)
220 17.10 (5.20)
450 25.30 (7.70)
900 37.10 (11.30)
1500 49.50 (15.10)
1800 55.10 (16.80)
2000 58.70 (17.90)
2500 66.90 (20.40)
3000 74.80 (22.80)
